Circles in Square Wire Pendant

Made for a March birthday, this pendant also served to remind me how square wire is so effective, and also exceedingly nice to work with. Round wire is used more often in jewellery making, probably partly because it's easily available in so many thicknesses. It's easy to forget about square wire but I find it delivers a certain satisfaction during the making process, and also looks sleek and subtle in the finished piece.



I set the tiny aquamarine gemstone using a sterling silver Wraptite setting. This wasn't quite as easy to work with as the video I watched had led me to believe (mainly due to the 'fiddliness' of such a small gem (4mm) and a nearly equally small setting), but looked good in the end, and also provided what feels like a strong and secure setting for a faceted gemstone.

Aquamarine is one of the most popular gemstones for March and the stone I bought was really quite beautiful, full of vibrancy that bounced light around. It reminded me how well colour works with sterling silver.

One Amber Bracelet equals One Amber Bracelet and One Amber Pendant

I get a little nervous when someone asks me to adjust an item of their jewellery. Perhaps not quite as nervous as I get if some asks me to mend some jewellery, but still nervous. You only seem to get asked for help with items that mean a lot to the owner and non-jewellery makers, understandably, don't know any of the potential horrors that came come with trying to turn one size of jewellery into another...

I was asked to adjust a bracelet that was so large that the owner, despite loving the piece, was just unable to wear it without fearing she'd lose it. I said I'd look at it but made it clear that if I didn't think I could do the adjustment safely then I wouldn't do it at all. Given the bracelet in question was set with stones, and amber ones at that (an incredibly soft stone as I mentioned in this post), I felt justified in my apprehension.

On being given the bracelet and sitting down with it, doing some thinking and doodling some ideas, I came to the conclusion that I was able to do what I was asked, and that was not only make the bracelet smaller but also make a pendant out of the stone-set link that I would be removing.
Despite my anxieties when I actually picked up my pliers and piercing saw I was surprised, and pleased, at how easy (relatively speaking) adjusting the bracelet and making the pendant turned out to be.

Audible sigh of relief.

My initial plan had been to cut through two of the connecting links, as shown in my illustration in the photo above, but on looking more closely I realised the clasp hadn't been soldered on and so I was able to prise it apart from the bracelet. I then cut through a connecting link and removed that and the stone-set link next to it. The clasp was then reattached to the bracelet which was now one silver connecting link and one amber stone-set link smaller.

When it came to making the pendant I decided against attempting to resolder the connecting link that had been cut through. A little research showed me it would probably be an error to trust to heat protecting compounds to protect amber from a soldering torch, and the general advice was that the best option in this situation is to remove the stone from its setting, perform the soldering, and then reset the stone. As I hadn't set the stone in the first place I did not want to do this, especially as, like I said earlier, amber is such a soft stone and could easily be damaged both in removing it from the setting and when putting it back in. The connecting link is made from thick, work-hardened silver and I felt confident that it would securely hold the pendant on the necklace.

I also decided against removing the extra 'loop' of silver that had connected the stone-set link when it when it was within the bracelet. This was mainly so that if the new size bracelet didn't fit (which was a concern as the stone-set links were quite large so the adjustment was kind of all or nothing) then it could be put back together again and a different option sought.

Despite my initial concerns at the request, I was pleased with how the adjustment went. And the owner of the jewellery? Well, the bracelet now fits perfectly and they have a matching pendant to boot.

Silver, citrine, topaz and toil... the finished jewellery

Recently I showed some photos of the cut gemstone beads I'd bought for a project. Here are some images of the finished jewellery items themselves.

The plan was a to make a necklace for a very special birthday, falling in November, so being able to incorporate birth stones was important. I also wanted to make something wearable so, while it may look delicate, the soldering and strengthening of the silver through hammering means it's pretty strong.







The earrings were less planned and came about as I didn't have enough citrines to use for both items, but this also allowed me to play with the varying sizes of the white topaz gems. I was also able to use one of the little soldered silver designs from the necklace, and echo it in the earrings.



It was a time-consuming and absorbing project, and took a lot of preparation, but the final piecing together of the necklace especially was surprisingly quick. Hope you enjoy seeing the results of the toil!

Pendants plus cords equal necklaces

A little while ago I wrote about having a heap of gemstones, some threading materials, and not yet having put the two together in a logical manner... well, that's changed.

I've still some gemstones that aren't strung, but now, more than not, are officially necklaces...

I've also begun the slow process of working through my extremely-badly-put-away silver-smithing gear and trying to to turn it back into a functioning set-up... stay tuned!

Saturday Folksy Listing Frenzy

Well, okay, it's only seven items but it seemed to take an age, as I sat in front of the computer with a tape measure and a clutch of necklaces and bracelets and a big, big mug of coffee.

Here's some photos (yes, taken on my old camera), but not of the big mug of coffee . . .











Click on the pic to go to the item in my shop if you fancy seeing more photos.

Listed at last . . .

I've finally made time, pushing other things firmly to one side (and considered throwing some of them out the window . . .), to do some listing on Folksy.

I've put some of the seashell necklaces I posted about here the other week for sale, and am hoping (but not promising . . . ) to have some solely silver things up soon as well.

I've also put something on sale, knocking the price down by around 25% which sounds an incredible amount!

And I've finally sorted out my postage prices for overseas selling, just in case, you never know, etc . . .

Oh, and I've twittered about it all as well.

And as the sun isn't really shining today, I think I'll finish with some sunshine from earlier in the week . . .

Valentine's listings . . .

At very long last, after much soldering and filing, more photographs than I can count being taken, and a few hours spent scratching my head in front of the computer, I've started to list some more items in my Folksy store, all with a Valentine (ie. heart) theme.

These are the first few . . .





More to follow!